Laboratory Equipments

BACTERIOLOGICAL INCUBATOR (MEMMERT TYPE) Pricillab™

Double walled inside made of thick Aluminium/ S.S. outer made of M.S. duly finished with Powder Coating. Thermostatically controlled. Temp. 5°C above room temp. to 90°C Accuracy ± 1°C. Door has double viewing window to observe the sample placed inside the chamber without disturbing the thermal condition. Complete with accessories.

B.O.D. INCUBATOR (Eco-Friendly) Automatic Pricillab™

It is specially designed for incubation of Biochemical Oxygen demand on water and sewage; this can be used as environmental study and growth chamber by incorporating lighting and humidification system. Triple walled inside anodized Aluminium/S.Steel outside mild steel fitted with air circulating fans. Full view inner glass door with magnetic gasket allows inspection of samples without disturbing the temp. of cabinet. Range 5°C to 60°C with an accuracy of ± 0.5°C by Solid State Digital Temperature Indicator cum controller, Refrigeration is done by ISI marked Compressor/Condensing Units CFC free & R-134 a eco friendly refrigerant and heating by air Heaters. Control panel has separate heating and cooling indicator lamps; temperature set allows the user to select any desired temp. Voltmeter is provided at the panel to check the incoming voltage

PRICILLAB™ MINI QUARTZ DISTILLER : Standard Model

Larger Boiling space resulting in more balanced boiling Better quality of distillate.    

• Better condensing area - Cooler distillate temperature
• Larger Quartz sheath, hence easy of replacement of heater element in case of burn out.
• Rust proof sturdy Aluminum stand as base.
• Ring Clamp with seating to house the Quartz Boiler.
• Condenser clamp facilitates telescopic adjustments and helps in perfect alignment of the system and installation of  the equipment.

• Advantages
  The distiller along with the specially designed borosilicate / quartz condenser (optional) is absolutely Thermal Shock Proof - a property well known of Fused Quartz. The Design of the equipment renders it compact and portable. The boiler has a drain vent to ensure in-situ cleaning of  the boiler. The MQD-Panel Series yields ample distilled water for use in laboratory. The equipment can be effectively used for distilling water. The Boiler is made of Electronic Grade Quartz and Options for Condenser are Borosilicate / Quartz.
  Pyrogen free.
• Free of heavy metals.
• Designed for pollution free distillate.
• INSTANT distilled water flow. Switch on time less than a minute.
• Quartz Boiler (SiO2) is chemically inert to most solvents and acids, hence purer distillate.
• No heat loss in the boiler, hence saves electrical power.
• High performance with low maintenance.
• Safety Cut-out (Optional at extra cost

Mini Quartz Distiller  Pricillab™  

 Quartz Boiler & Borosilicate Condenser

Cat.No	Output capacity	Price
PQSI	1.0ltr/hr	POR
PQSII	2.0ltr/hr	POR
PQSIII	3.0ltr/hr	POR
PQSIV	4.0ltrs/hr	POR
PQSV	5.0ltr/hr	POR

Code	Specification  & Sizes	Packing
1292	Round Hot Plate  Pricillab™ These are fitted with a cast iron platform with energy regulator, digital temperature control module and a working voltage of 220 Volts. Size:- 20 cm dia , 22.5 cm dia 30  cm  dia	1

Code	Specification  & Sizes	Packing
1284	Centrifuge Machine  Pricillab™ Centrifuge machines have an epoxy coated body while a speedometer, speed control module and timer are also incorporated.	1

VERTICAL AUTOCLAVE  fully automatic Pricillab™ 

Specifications:

Microprocessor based fully automatic operation, PID

digital controller with LCD display, Inner chamber, outer

chamber fully made of stainless steel, 400x600 mm, 78

ltrs, µProcessor based controller with time and

temperature programmable by user, Low water level

alarm and cut off for safety of heater, operating pressure

from 15psi to 22 psi (adjustable), Sterilizing temperature

up to 1340C, with auto purging, auto exhaust facility

WATER  BATH  ( Double Walled )  Pricillab™ 

Specifications

» Double walled inner made of stainless steel. » Exterior of G. I. Sheet duly finished in epoxy powder coated shade in Regular MODEL. » Highly insulated between two walls. » Selection from three controllers hydraulic thermostat, solid – state Digital controller or Microprocessor based PID Temp. Controller. » Concentric rings to use flask from 50 ml to 500 ml capacity. » Selection from Regular, GMP Model and high precision cGMP Model. » GMP MODEL having inner 304 & Exterior 304 S.S. matt finish. » High Precision GMP Model includes single speed stirrer, PID Controller, round edge corner & elegant in design. » Long lasting elements. » Temp. Range : Above ambient to 990C. » Usable with round bottom flask-keeping on lid only. » Operates on 230 Volts A.C.

REFRIGERATED WATER BATH WITH CIRCULATION SYSTEM  Pricillab™

Inner chamber made of Stainless steel, outside mild Steel  Powder Coated. The gap between the two is filled with glass wool. Heating by immersion heater placed in the chamber and cooling by sturdy refrigeration unit duly controlled by Electronic Digital Temperature Controller Cum Indicator from 5°C to 90°C with Sensitivity of ± 2°C. Front panel is provided with indicator lamp individual switches for heating and cooling purpose.

Separate pump is provide for drain out  

Product Specs

Model	Inner Size (LxBxD)	Approx.Ltrs. Cap.
RWB-1	250 x 250 x 250 mm	27
RWB-2	500 x 250 x 250mm	22

TISSUE CULTURE RACK   -  Pricillab™

Construction: Racks are made of Square mild 

steel pipes duly Powder coated paint for longer life

Racks: Each rack of size 48"x12" (depth) is 

covered with thick unbreakable plexi glass Which are terminate and insect proof fire and weather 

resistant. Distance between each rack is 15".

Lighting: Four Electronic fluorescent tubes (Choke less) are properly illuminated by diffused, glare free fluorescent lights are built in upper portion in worktable. 

UV Germicidal Light: Are fitted inside the rack 

Timer: 0-24 Hours ElectronicDigital Timers are provided  of tissue culture rack. 

Control Panels: All control panels are fitted 

tops of tissue culture racks. On/Off switch of 

fluorescent tubes and UV tubes. All control 

panels are fitted separately  with indicator light.

Easy Mobility: The whole rack is provided with 

four nos. castor wheels at the bottom

 LAMINAR AIR FLOW BENCH (HORIZONTAL) Pricillab™

This complete package unit is provided to give clean air to any laboratory. Useful where any hyper critical work has to be performed within minimum contamination as they assure 99.97% removal of airborne particles as 0-3 microns in the work area. The basic elements are pre-filters, heavy duty blower assembly; HEPA (high Efficiency particular Air) filter (Absolute filter) fresh air is drawn through the pre-filter and passes to absolute HEPA filter. Ultra clean air moves horizontally in Laminar flow bench cross the work area at a velocity of approximate 90; ± 20 feet per minute. 

CONSTRUCTION : Basic material is CRCA Sheet with powder coat finish  filter seat is carefully formed, installed and checked for leakage. Work table is made of S.S top and side panels are made of 6 mm thick glass transparent framed in anodized Aluminium angle frame. Blowers are fitted with 1/4 H.P. Electric Motor operates with minimum noise and vibration. Suitable to operate on 220 Volts 50 Cy. AC supply.

Complete with HEPA Filters, Prefilters, Motor Blower, Manometer, Gas Cock, Transparent Acrylic Sheet Front and Side Doors.

Product Specs

Model	Working Area	HEPA Filter Size	No. of Pre Filters	Illumination Florousent Tubes	U.V. Tube
HLF-1	2’x2’x2'	2’x2’x 6"	1	2 x 20 W	1 x 15 W
HLF-2	3’x2’x2'	3’x2’x 6"	1	2 x 20 W	1 x 30 W
HLF-3	4’x2’x2'	4’x2’x 6"	1	2 x 40 W	1 x 30 W
HLF-4	6’x2’x2'	3’x2’x 6"	2	2 x 40 W	1 x 30 W